1. Degree of Protection : IP 65 for Push Button Enclosure with Indicators & Actuators
2. Safety : Fully isulated to hose electrical & electronic equipment w.r.t. protection against electric shock.
3. Material :
Bottom Cover : Tough, Impact resistant & fire retardant ABS.
Top Cover : Tough, Impact resistant & fire retardant ABS.
Gasket : Nitrile rubber, which is good resistant to Oil & acids.
Screws : Half threaded Self tapping Cold Forged Screws with blacodising.
Type of Enclosure
Size in mm (Length, Width, Depth)
Screw Size for wall Mounting : M3.5 mm Insertion of Screws directly through base cover.
Maintenance: Do not need any particular maintenance. If necessary, soap, and water can be used for cleaning. If detergent is used, enclosure should be rinsed well clean water. Do not use any solvents to clean the enclosures.
Chemical resistance : ABS Products are almost completely resistant to aqueous acids, alkalis and salts, Concentrated phosphoric and hydrochloric acids have little effect. Low KB solvents, alcohols and animal / vegetable / mineral oils produce insignificant changes. Aromatic or chlorinated hydrocarbons and high KB solvents cause marked swelling. Esters ketones and unsaturated alkalis are solvents for ABS and should not be used.
Temperature Range: Long term exposure to temperatures above 70OC should be avoided. No significant change in impact strength is noticed up to-20OC.
Salient features :
Sleek, Compact & Unique design
Rounded ergonomic Enclosure
Good Aesthetics, occupies less space
Easy to grip, assemble & operate
Robust & maintenance free
Special fire retardant engineering plastic used to make it Light, corrosion resistive & non-conductive to heat
Comply with safety IEC standards with IP65 Ingress protection
Available range of Enclosures: Single, Two, Three, Four, Six & Eight Station
Indoor & Outdoor use
Available in standard configuration of Actuators & LED Indicators
Panel Mounted Valves.
Mentioned products are available as ex-stock, for any special requirement please contact us.